EWN-C31PEUR Walchem Metering Pump 4.3 gph 50 psi

Walchem metering pump 4.3 gph 50 psi

PVC construction with ceramic balls, EPDM valve seats and O-rings, PTFE diaphragm

Includes ceramic weight, foot valve, injection valve and 20 ft of 1/2” polyethylene tubing

Identification

Pump head is black, size should be stamped on head, EPDM elastomers have yellow dot on them

Replaces model EWC30F1-PE and EWC31F1-PE

Features

EWN pumps have outputs to 6.7 GPH (25.2 L/h) and a maximum pressure of 290 PSI (20 bar). The high speed of operation results in high resolution chemical feed and long service life. Quiet and compact, the EWN pumps prime in seconds and hold prime reliably.

• E-Series pumps operate up to 360 strokes-per-minute with adjustments in 1 spm increments, providing high resolution chemical feed. Adjustable stroke length further increases the ability to refine the output.
• The controller in the EWN-R pump provides for flexible pump control including scalable Analog control, Digital Input with both Multiply and Divide capability, external stop control, or simple speed and stroke length control. The controller is universal voltage so it can be used anywhere in the world – stocked with “U” USA standard 115VAC plug.
• All E-Series pumps feature dual bearing support. The armature and shaft are supported with a bearing on each end, which ensures proper axial movement, enabling the E-Series to operate at 360 SPM while extending the life of the diaphragm.
• Dual Check Valve Assemblies in both suction and discharge fittings feature precision ball guides and tapered seats. Precise machining and molding of parts limit valve ball travel, ensuring that balls fully seat and seal with every stroke. This superior check valve design guarantees fast priming and reliable performance.
• The compression ratio of a metering pump is important because it affects the pump’s ability to prime and vent. The compression ratio is raised when you reduce the dead volume of the pump head during operation. All E-Series pumps feature a very high compression ratio that ensures proper feed especially with off-gassing products (i.e. Sodium Hypochlorite).

Brochure