PD10P-FKS-KTT ARO 1" PVDF Non-Metallic Pro Series Air Operated Double Diaphragm Pump (Fits Expert Series Applications)
ARO
$3,486.90
(No reviews yet)
Write a Review
ARO
PD10P-FKS-KTT ARO 1" PVDF Non-Metallic Pro Series Air Operated Double Diaphragm Pump (Fits Expert Series Applications)
P/N PD10P-FKS-KTT ARO 1" PVDF Non-Metallic Pro Series Air Operated Double Diaphragm Pump (Fits Expert Series Applications)
The ARO PD10P-FKS-KTT is a 1-inch non-metallic air-operated double-diaphragm pump designed for dependable fluid transfer in industrial, chemical, and water/wastewater applications. Its durable polypropylene center section with PVDF (Kynar®) fluid caps and manifold, combined with a PTFE/Santoprene diaphragm, PTFE valve balls, and PVDF seats, provides a strong balance of chemical resistance and fluid compatibility for a variety of demanding applications.
The ANSI/DIN flange connection provides installation flexibility, while the bolted construction supports reliable, leak-resistant operation and convenient serviceability. This pump is well suited for fluid transfer, filling, recirculation, supply, and other applications where dependable performance, chemical resistance, durability, and ease of maintenance are important.
Application suitability should be confirmed based on the specific fluid, concentration, temperature, viscosity, chemical compatibility, solids content, and operating conditions.
Polypropylene Center Body, PVDF Fluid Caps & Manifold, Stainless Steel Hardware
53.0 GPM (200.6 LPM) Maximum Flow Rate, PVDF Seats, PTFE Balls, PTFE / Santoprene Diaphragm, 1" ANSI / DIN Flange / End Connection
| Air Inlet | 1/4 - 18 NPT |
| CCN Number | 15203227 |
| Connection Size | 1" |
| Connection Type | 1" ANSI / DIN Flange / End |
| Diaphragm | PTFE / Santoprene |
| Discharge Volume Per Cycle | 0.226 Gal (0.86 Lit) |
| Inlet Pressure (PSI) | 120 psig (8.3 bar) |
| Liquid End Configuration | PVDF Fluid Caps & Manifold |
| Material | Polypropylene Center Body |
| Maximum Flow (GPM) | 53.0 GPM (200.6 LPM) |
| Maximum Working Pressure (PSIG) | 120 psi (8.3 bar) |
| Max Suction Lift | 19 Feet (5.7 m) |
| Metal Parts | Stainless Steel Hardware |
| Solids (Inches) | 1/8" (3.2 mm) |
| Temperature Range | 40 ° to 200 °F (4 ° to 93 °C) |
| Type | Standard Pump |
| Valve Balls | PTFE |
| Valve / Seat / O-Ring | PVDF |
